|
APSX RW-210 RFID Reader/Writer Module (TTL / USB AVAILABLE)
To connect to a PC; USB Cable OR a serial
cable and level converter (C-100 is sold separately),
and 6V DC wall adapter are required. Our test application is available
(FREE) to be downloaded on support pages.
$48.49 (Free
Shipping in USA)
You will be directed to APSX Online Store
|
|
The reader has an integral antenna and works with variety of 13.56MHZ ISO15693
tags including, but not limited to Texas Instruments (Tag-It) and Philips
(I-CODE SLI). Philips Mifare (ISO14443A) is not supported.
Specifications:
-
13.56MHz
-
Read/Write Range 7”
directional (4" radius cone shape)
-
Dimensions: (4.5" x 2.7”x 0.25”)
-
On-board antenna
-
Built-in TTL. If you dont use USB cable,
need to use level converter to connect directly to PC (max232) or use APSX
C-100 converter board. DC or Battery power for mobile operations. Power
consumption 20mA at stand by, 50mA in fast mode (20 reads per sec.)
under regulated 5V
-
Powerful firmware enables read and write
of any type 13.56 MHz RFID Tag (ISO15693)
-
Two programmable LEDs are available for visual feedback
|
It fits into "Flanged
Lid Plastic Enclosure". If you want to order with enclosure ($74.99 per
reader), just send us an email (info@apsx.com).
Please note that the minimum order quantity for RW210 with enclosure is 100.

Benefits:
-
Simple interface
-
No maintenance
-
Test application helps developers to better understand the 15693 protocol
-
Low power consumption suited for stand-alone terminals
-
Shorter transaction time than 125 kHz systems
-
Longer battery life for the portable devices that require RFID
functionality
Applications:
-
Access control
-
Security
-
Ticketing
|