APSX RW-110 RFID Reader/Writer (TTL)

Ultra Slim Design for Space Limited Applications

APSX RW-110 supports read/write functionality for ISO15693 RFID tags with an operating frequency of 13.56MHz.

Our test application is available (FREE) to be downloaded on support pages.

$49.95      
You will be directed to APSX Online Store

The reader has an integral antenna and works with variety of 13.56MHZ ISO15693 tags including, but not limited to Texas Instruments (Tag-It) and Philips (I-CODE SLI). Philips Mifare (ISO14443A) is not supported.

Specifications:

• Read/Write Range 4”
• Dimensions: (1 7/8" x 1 1/8” x 0.25”)
• Powerful firmware enables read and write of any type 13.56 MHz RFID Tag (ISO15693)
• Power consumption 20mA at stand by, 50mA in fast mode (20 reads per sec.) under regulated 5V
• Built-in TTL
• 13.56MHz
• 19200 bps Data Rate
• On-board antenna
• One programmable LED is available for visual feedback
• Requires a clean regulated 5VDC supply
• Simple modifications are necessary when used with C-100
  

Benefits:

• Simple interface
• Small in size
• Allows user to program own cards
• Test Application helps developers to better understand the 15693 protocol
• Low power consumption suited for stand-alone terminals

Applications:

• Access control
• Patron management
• Robotics

Wire Connections

To connect the reader to your system, follow these guidelines for the wire connections:

RW110 Pin 1 (Ground) to C100 Pin 7 Ground
RW110 Pin 2 (RC) to C100 Pin 6 (RC)
RW110 Pin 3 (TX) to C100 Pin 5 (TX)
RW110 Pin 4 (5V-Regulated) to Pin 4 (5V-Regulated)
RW110 Pin 5 (not used)

Our test application is available (FREE) to be downloaded on support pages.