It can be used with all plastic materials. It includes 4 shoulder bolts and 2 pairs of claws. The A side do not use claws to mount. There are four shoulder bolts. Please mount it so that the upper side is flashed to the block 4's upper side. Shoulder bolts are intentionally longer to create a small gap between the mold and the nozzle plate. This allows to keep the mold cooler since it gets full contact to nozzle plate only at full clamping stage.
When you install the A side with four shoulder bolts and the B side with claws, you can use manual control buttons to clamp the mold to check the alignment. When they start to mate, you can HALT the machine to stop. The pins and bushings are tight fit and needs to be pressed in by the machine not by hand.
Dimensions: 4.8"W x 6.0"H x 2.0"D.
Alignment pins are included.
We work with the following companies on mold making for the APX-PIM Injection Machine.
APSX-PIM Blank Mold (PDF) (67 KB)
APSX-PIM Blank Mold (STEP) (2.7 KB)
APSX-PIM Blank Mold (DXF) (2 KB)